Publicidad
Idiomas disponibles
Idiomas disponibles
S S e e t t u u p p
To unpack your product, see the unpacking instructions that are attached to the product inside of the shipping crate.
W W A A R R N N I I N N G G
• Always allow the product to reach room temperature before you set up the product or test functional operations.
Permanent product damage may occur.
• Always operate the product when all operators are clear of the mechanisms.
Make sure that the product is working before you put the product into service.
1. Apply the brake. Push on the product to make sure that all four casters are locked.
2. Release the brake. Push on the product to make sure that all four casters are unlocked.
3. Raise and lower the litter with the hydraulic lift system.
4. Raise the product to the highest position and put the product in the Trendelenburg position. Make sure that the head end
lowers to the full down position.
5. Raise the product to the highest position and put the product in the Reverse Trendelenburg position. Make sure that the
foot end lowers to the full down position.
6. Apply the fifth wheel (option) and make sure that it guides and pivots the product.
7. Make sure that the access doors (option) open, close, and lock.
8. Make sure that the side/endrails raise, lower, and lock in the 9 in. (option), 14 in., and upper position.
9. Raise and lower the manual Fowler backrest (head section).
10. Raise and lower the manual foot section.
1900-009-005 REV A.2
9
EN
Publicidad
