Publicidad
Idiomas disponibles
Idiomas disponibles
To position the retracting protective top:
1. To partially open the protective top, squeeze the two release knobs (E) and lift the lower rail (F) until the anchors points
are passed (G) (Figure 17). Release the knobs and lower the rail until it rests on the anchor points.
N N o o t t e e - - Make sure that the lower rail ends are secure in the anchor points by trying to lower the rail without squeezing the
release knobs.
2. To completely open the protective top, squeeze the two release knobs (E) and lift the lower rail (F) to the maximum
height and release the knobs (Figure 17).
3. To close a partially open protective top, lift the lower rail (F) from the anchor points (G) and squeeze the two release
knobs (E) while lowering the rail to the closed position (Figure 17). Release the knobs.
4. To close a completely open protective top, squeeze the two release knobs (E) and lower the lower rail (F) to the closed
position (Figure 17). Release the knobs.
EN
30
1900-009-005 REV A.2
Publicidad
