Application; Positions Of Blades And Changing Position - Stihl BC-KM Manual De Instrucciones

English / USA

Application

General
:
Put on the harness.
: With the engine running, attach the
cultivator to the harness.
Operate your cultivator with the
engine running at half throttle.
10
2
You can work with your cultivator in the
forward (1) and backward (2) directions,
from left to right or vice versa (3) or in a
circular motion.
Choose the best method to suit your
purposes, i.e. this depends on the shape
and size of the area and soil conditions.
Working in an alternating backwards
and forwards motion is particularly
suitable for loosening packed soil.
Positions of Blades and
Changing Position
The position of the blades has to be
adjusted to suit the soil and the job. The
blades can be fitted to the cultivator in
three different positions A, B and C.
A
3
1
a
Blades in position A
The blades (a) and (b) are set at the
factory to this position. This position is
particularly suitable for deep tilling
previously cultivated, packed soil and
digging or plowing heavy soils.
Changing position of blades
To change back to the original position
(above), reverse the changeover
procedures described below.
b
BC-KM