Panasonic SC-PT770 Instrucciones De Funcionamiento página 17

Adjusting the speaker output level manually
Preparation
≥ To display the picture, turn on the TV and select the appropriate video
input mode.
≥ Press [i, ` VOL] to adjust the volume to normal listening level.
≥ Select "TEST TONE" from "SPEAKER SETTINGS" in AUDIO menu
( 29).
1
Enter test tone mode.
OK
e.g.
Test tone will be output to each channel in
the following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND LEFT
2
Adjust the speaker level for each
speaker. (CENTER, SURROUND
OK
RIGHT, SURROUND LEFT)
`6 dB to i6 dB (Factory preset: 0 dB)
≥ To exit the screen, press [SETUP].
To adjust speaker level during play
(Effective when playing 5.1-channel sound or when "ÎPLII" lights.)
1 Press and hold [—CH SELECT] to select the speaker.
While the speaker channel is displayed, press [—CH SELECT].
L# C# R# RS# LS# SW
^----------------------------------------------}
≥ You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel and "ÎPLII" is not lit.
≥ "S" appears on the main unit's display when you have selected
"S.SRND" ( 16, Enjoying surround sound effects). In this case,
you can adjust both surround speaker levels at the same time using
[3, 4].
S: `6 dB to i6 dB
2 Press [3] (increase) or [4] (decrease) to adjust the speaker level
for each speaker.
C, RS, LS, SW: `6 dB to i6 dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while "L" or "R" is selected,
press [2, 1].
AUDIO-SPEAKER SETTINGS-TEST TONE
SPEAKER TRIM LEVEL
LEFT − −
CENTER 0dB
RIGHT − −
SURROUND RIGHT 0dB
SURROUND LEFT 0dB
SET
RETURN EXIT : SETUP
17