Step 1 Assembling The Front Speakers - Panasonic SC-PT770 Instrucciones De Funcionamiento

Sistema dvd de cine en casa
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

step 1
Assembling the front speakers
Preparation
≥ To prevent damage or scratches, lay down a soft cloth to assemble speakers.
≥ For assembly, use a Phillips-head screwdriver (not included).
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥ Keep the screws out of reach of children to prevent swallowing.
≥ For optional wall mount, refer to page 27.
2 Front speakers
1
2
Speaker assembly option
Thread the speaker cable through
the base.
You can remove and use the
cable from the stand. To reattach
the cable, refer to page 27.
Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the walls
or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper attachment may result in
damage to the wall or speakers.
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the
speaker
6
2 Stands
(with cable)
Position the cable
between the ridges.
Leave about 120 mm
Attach the speaker.
Leave about
120 mm
Screw eye
Wall
(not included)
2 Bases
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Press into the groove.
Tighten securely.
Caution
Do not stand on the base. Be cautious when children are near.
DO
NOT
Approx.
150 mm
8 Screws
Push!
Push!
Slide into
the groove.
2
1

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido