Wall Mount Installation - GE 29470 Guía De Usuario

W M
ALL OUNT
The speakerphone can be mounted on a
wall plate (not included).
1. Rotate the handset hook.
2. Press down and out on the two snap tabs
located on the top of the wall mount. Lift
adapter off.
3. Plug white straight line cord into base
jack LINE 1+2. Note that you must use a
RJ14C jack.
4. Reverse the wall mount so that the
thickest part is at the bottom of the base.
Place about 3" of the cord through the
opening in the wall mount.
5. Replace the wall mount by inserting the
top end in first and slide the base down.
12
I
NSTALLATION
1
3
5