Specifications; General Specifications - koban KMD 05 Manual De Instrucciones

• Place the tip of the thermocouple to the sufarce of the object be tested and
read the measurement on the display.
Warning
To prevent injury or damage to the meter, do not move the rotary switch
to the temperature position while measuring voltages exceeding 30V.

Specifications

General specifications

Safety Rating:
Operating altitude:
Operating Temperature/
Humidity:
Storage Temperature/
Humidity:
Temperature coefficient:
Max. Input between terminals
and earth ground:
Fuse protection:
Sample rate:
Display:
Overload Indication:
Low Battery Indication:
Polarity Indication:
Power Source:
www.grupotemper.com
CAT III, 600V; pollution degree II
<2000m
0°C to 40°, <80% RH
-10°C to 60°C, <70% RH, remove battery
0.1 x accuracy/ºC(>18ºC or <28ºC)
600V DC or AC rms
μA/mA ranges: F 250mA/600V
10A range: F 10A/600V
Approx. 3 times/sec.
3 ½ digit LCD display
Display shows OL
When battery voltage drops below normal
operating voltage,
display.
Display automatically displays "-"
1 x 9V battery
KMD 05
Digital multimeter
is shown on the
Instructions manual | 23