Maintenace; General Maintenance - koban KMD 05 Manual De Instrucciones

KMD 05
Digital multimeter
minutes continuously. Wait 10 minutes to continue measurement.
AC Current
Range Resolution
200μA
2000μA
20mA
200mA
10A
Overload Protection: mA jack: F250mA/600V fuse; 10A jack: F10A/600V fuse.
Frequency response: 40 ~ 400Hz, sine wave rms (avg. response)
Max. input current: mA jack: 200mA DC or AC rms; 10A jack: 10A DC or AC
rms.
When measuring current exceeding 2A, do not measure for longer than 2
minutes continuously. Wait 10 minutes to continue measurement.
Battery Test
Position Resolution
-20~750ºC
-4~1382ºF
Overload protection: F250mA/600V fuse.

Maintenace

General maintenance

This section provides basic information on maintaining the meter, such as
replacing fuses and the battery. Only experienced and authorized personnel
should make repairs to the meter.
Warning
To avoid injury or damage to the meter, do not allow moisture inside the
case and remove test leads before opening battery cover.
Use a damp cloth to regularly clean the aoutside of the meter. Do not use
abrasives or chemical solvents. Dirty or damp input jack can adversely affect
Instructions manual | 26
0.1μA
1μA ±(1.0% of reading + 3 digits)
0.01mA
0.1mA ±(1.2% of reading + 3 digits)
10mA ±(1.5% of reading + 10 digits)
1ºC
±(1.0% of reading + 2 digits)
1ºF
Accuracy
Accuracy
www.grupotemper.com