Brinkmann 810-3090-S Manual Del Propietário página 17

Grill Body
Assembly
M6 X12 mm
Bolts
M6 Flat
Washers
M6 Nuts
Left Front Leg
(with Axle Holes)
Wheel
M12 Nut
Grill Body
Assembly
Bottom View
Left Rear Leg
(with Axle Holes)
Bottom Shelf
Wheel Axle
Step 4
Attach the left front and rear legs (with
wheel axle holes) to the grill body
assembly. First, insert the bottom shelf
into the left rear leg, then move bolted
end of leg until bolts align with holes in
the grill body assembly. Attach using
four M6 X12 mm bolts, M6 flat
washers and M6 nuts. Hand tighten
only. Repeat this step for left front leg.
Tighten all bolts and nuts for each leg
attached to the grill body assembly.
Step 5
Insert wheel axle through left front and
rear legs and attach wheels using two
M12 nuts as illustrated. Tighten
securely.
Note: With the help of a friend, lift the
grill body assembly to an
upright position. Try to minimize
the stress to the legs.
CAUTION: Keep lid closed when
setting unit upright to
prevent bodily injury.
16