Technical Data; Protecting The Environment - Black+Decker KA2000 Traducción De Las Instrucciones Originales

Emptying the dust cassette (fig. D, E & F)
The dust cassette should be emptied every 10 minutes of use.
While holding the tool, pull the dust cassette (2) off the
u
tool.
Remove the cassette lid (10).
u
Shake the lid (10) and dust cassette (2) to empty the
u
contents, the filter (11) inside the lid (10) can be cleaned
with a soft dry brush.
Refit the lid (10) to the dust cassette (2).
u
Refit the dust cassette (2).
u
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
Regularly clean the ventilation slots in your tool using a
u
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
z able for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ-
mental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
(Original instructions)
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com

Technical data

Input voltage V
ac
Power input
W
Oscillations (no load)
min
Orbits (no load) min
Sanding base surface
mm
Weight
kg
L (sound pressure) 73 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 84 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
ENGLISH
KA2000 KA2500
(Type 1) (Type 1)
230 230
120 120
-1
28,000 28,000
-1
14,000 14,000
2
8161 8161
1 1
2 2
) 7.0 m/s , uncertainty (K) 1.5 m/s
h
7