OPERATION
Before using the oven for the first time
l Remove packaging, clean the interior of
the oven,
l Take out and wash the oven fittings with
warm water and a little washing-up liqu-
id,
l Switch on the ventilation in the room or
open a window,
l Gently press the knob and turn it right to
position
or
tronic programmer operation and oven
control),
l Heat up the oven (to a temperature of
250°C for approximately 30 minutes),
remove any stains and wash the interior
carefully.
The oven is equipped with a retractable
knobs. In order to select a function do the
following:
1. Gently press and release a knob which
will pop out,
2. Turn the oven functions selection knob to
the desired function.
Symbols printed around the knob indicate
available oven functions.
1
2
(see section: elec-
Important!
To clean the oven, only use a cloth
well rang out with warm water to
which a little washing-up liquid has
been added.
Important!
When the appliance is switched on for
the first time or when there has been
a power cut, 12:00 is shown on the
display and
Set the correct time using the control
knob
Time will be set if setting is not chan-
ged within 5 seconds and the menu
button is not pressed
Operation of the oven is not possi-
ble if current time is not set.
46
. symbol is flashing.
.
.
MENU