Descargar Imprimir esta página

Tips - Gloria 410 T Serie Instrucciones De Uso

Ocultar thumbs Ver también para 410 T Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55
a) quick close valve with metal operating
lever:
- unscrew the handle on the quick close
valve for cleaning.
b) plastic quick close valve with plastic
operating lever:
- unscrew the quick close valve at the hose
connecting socket for cleaning.
● The service life of the unit will be greatly
extended by occasionally applying resin
and acid-free grease to the sealing ring
between the pump and the tank and to
the inner O ring.
● To obtain optimum cleaning of the spray
unit and to ensure that spray compound
residues are neutralised, the use of S pe-
cial Activated C harcoal is recommended
– this can be obtained from the manufac-
turer.
● U se only original replacement parts for
repairs.
● R epairs may only be implemented by the
manufacturer's service stations.
● Important note: U ndue strain caused by
the mode of operation (including trans-
port to site where used
and storage when not in use), environ-
mental influences (at the site where used
and where stored when not in use), insuf-
ficient maintenance and care may lead to
premature wear and tear of the unit. F or
this reason, always check the unit before
use to make sure that it is in a safe and
operable condition, at least, however, for
outwardly recognisable signs of damage.
To ensure continued safe operation of the
unit, a technician, preferably from the
manufacturerís service department,
32
should inspect the unit in the event of de-
fects affecting safe operation, in particu-
lar, but at a minimum every five years.
T he national regulations applicable at the
place of use regarding safety at work and
the national regulations applicable to the
company must be complied with.
** The separate sheet "O ptional Accessories
and N ozzle Table" is only available in G er-
man and is not included with all models.
W e reserve the right to make technical
changes.

Tips

Tube fastening when in park position
7
5 litre units– F ig.
19
10 litre units– F ig.
● To keep the tubes close to the unit, they
can be clipped onto the pump handle at
the top.
Storage compartment
8
5 litre units– F ig.
20
10 litre units– F ig.
● S mall or accessory components (e.g.
spare seals or nozzles) can be kept in the
storage compartment.
C lipping in the carrying straps
(10 litre units only)
21
F ig.
● To protect the carrying straps against
moisture or dirt or to avoid danger of trip-

Publicidad

loading

Este manual también es adecuado para:

410 trk serie510 t serie405 t505 t