Setting A Remote Ui Pin - Canon imageRUNNER 1435iF Manual De Instrucciones

Setting a Remote UI PIN

You.can.set.a.PIN.for.access.to.the.Remote.UI..All.users.use.a.common.PIN.
NOTE
When.Department.ID.Management.is.enabled,.setting.here.is.not.required..For.more.information,.see."Setting.
the.Department.ID.Management".in.the.e-Manual..
1.
Start the Remote UI and log on in System Manager Mode. (See "Starting the Remote UI" in the
e-Manual.)
2.
Click [Settings/Registration].
3.
Click [Security Settings] [Remote UI Settings].
4.
Click [Edit].
5.
Select the [Use Remote UI Access PIN] check box and set the PIN.
[Use Remote UI Access PIN]
If.you.select.this.check.box,.you.must.enter.a.PIN.to.access.the.Remote.UI.
[Set/Change PIN]
To.set.a.PIN,.select.the.check.box.and.enter.a.number.of.up.to.seven.digits.both.in.the.[PIN].and.[Confirm].text.
boxes.
6.
Click [OK].
NOTE
If.PIN.is.forgotten:
Set.a.new.Remote.UI.Access.PIN.in.the.settings.menu.on.the.operation.panel..Perform.the.following.operation.
on.the.machine:.Press.
Security.Settings>. .<On>. .Enter.PIN. .<Apply>. .Enter.PIN.(Confirm). .<Apply>. .
If.Remote.UI.settings.are.initialized:
The.Remote.UI.Access.PIN.is.also.initialized..After.an.initialization,.reset.the.PIN..(See."Initializing.Menu".in.the.
e-Manual.)
. .<System.Management.Settings>. .<Remote.UI.Settings>. .<Remote.UI.Access.
..
Setting a Remote UI PIN
5