Step 1
Open the door fully and hold both
hinges.
Step 3
Close the oven door halfway to the
first opening position. Then lift and
pull forward and remove the door
from its seat.
Step 5
Turn the fasteners by 90° and remove
them from their seats.
Step 7
Clean the glass panels with water and soap. Dry the glass panels carefully. Do not clean the glass
panels in the dishwasher.
Step 8
After cleaning, install the glass panel and the oven door.
When installed correctly the door trim clicks.
Make sure that you install the internal glass panel in
the seats correctly.
18
ENGLISH
Step 2
90°
Lift and turn the levers fully on both
hinges.
Step 4
Put the door on a soft cloth on a stable
surface and release the locking system
to remove the internal glass panel.
Step 6
First lift carefully and then remove the
glass panel.
1
2
A