Publicidad
Idiomas disponibles
Idiomas disponibles
B.
MODEL AM100T SPECIFICATION.
Power Handling:
Operating Voltage:
Taps:
Sound Pressure Level @ 10', 100 Watt Tap:
Frequency Response:
Construction:
Mechanical Connection of Driver:
* Pink noise band-limited from 400 to 4000 Hz using AM100H-SB Horn.
Weight:
Shipping
Net
Dimensions:
Diameter
Height
Recommended Horn:
C.
UNPACKING.
After unpacking the Model AM100T, examine it for damage that may have
occurred in transit. If the equipment has been damaged, do not attempt to install or
operate it. File a claim immediately with the carrier stating the extent of the damage.
Carefully check all envelopes, shipping labels and tags before removing or destroying
them.
D.
INSTALLATION.
1.
Mounting (see figure 1).
a.
Position the washer in the throat of the horn (purchased separately).
b.
Screw the 1-3/8 – 18 threaded driver throat into the horn.
c.
Install the horn/driver assembly in intended location, referring to the
instructions provided with the horn.
d.
Route the speaker wiring to the horn/driver assembly (2 x 14-18 AWG
recommended). The cable gland will accept 5/16" to 1/2" diameter cables.
This unit is heavy and should be mounted on a rigid surface capable of
supporting the weight of the speaker.
100 watts
70 Volts
100, 50, 25, and 12.5 Watts
121 dBa*
300 - 3000 Hz
Rugged die cast painted housing for
indoor or outdoor use.
1-3/8"-18 thread, 1/2" long
5.6 lbs. (2.5kg)
5.4 lbs. (2.4kg)
5.04" (128mm)
6.93" (176mm)
AM100H-SB
-2-
Publicidad
