Nightview With Or Without Flash - Kodak EasyLoad35 KE115 Manual Del Usuario

If you want to change the default setting
to auto-flash without red-eye reduction,
press (19) and deselect the red-eye-
MODE
reduction indicator (38).
Nightview with
or without flash
Use flash to balance the flash and existing
light exposure so that you can take beautiful
pictures of people at sunset or at night, or
select flash off when you just want to use the
existing light. The camera-warning
light (12) "blinks" red to alert you that the
shutter speed is slow. In these situations—
use high-speed film, place the camera on a
tripod or another firm support, and hold your
camera steady to take a picture.
22
1. Follow steps 1–3 on page 19
for TAKING FLASH PICTURES.
2. Repeatedly press
the nightview symbol (31) and flash
symbol (32) or nightview symbol (31)
without the flash symbol appears on the
LCD panel (17).
3. Look through the viewfinder eyepiece (11)
to compose your picture.
4. Hold the camera steady and gently press
the shutter button (1) to take the picture.
• To cancel the nightview modes, press
/ (23) to turn off the camera or
ON OFF
press
EXPOSURE
different option.
(21) until
EXPOSURE
(21) to select a