Starting Signal Reception Manually - ADE WS 1502 Instrucciones De Operación

− Hours
− Minutes
− Date format
− Year
− Month
− Day
− Language (relates exclusively to the weekday
8. Finally, press MODE to conclude the procedure.

Starting signal reception manually

Press and hold the - button until the radio signal symbol
is displayed again. The signal reception is thus started
manually. Pay attention to the following:
‚ If the reception was not successful, the reception
symbol fades out after a few minutes and the time on
the display continues normally.
‚ Upon successful signal reception, the radio-controlled
alarm clock adjusts itself to the time of the time signal
transmitter. If you have already carried out manual
time and date settings, these will be automatically
adjusted.
58
FW Station.indb 58
indicator)
If the radio signal symbol to the left is no longer
displayed, the radio signals from the time signal
transmitter are no longer being received. The time
indicator nevertheless continues precisely.
Weather Station with Wireless Outdoor Sensor WS 1502/1503
21.09.2015 09:45:59