Setting Time And Values Manually; Starting Signal Reception Manually - ADE WS 2136-1 Instrucciones De Operación

Setting time and values manually

If there is more than approx. 20 seconds between
two pushes of a button, the setting process
automatically ends and you will have to repeat it.
1. Press and hold the SET button until the temperature
unit (°C or °F) blinks on the display.
2. Use the + or – buttons to set the desired unit of
measurement.
3. Press SET in order to save the settings. The time format
("24 Hr" or "12 Hr") blinks on the display.
4. Proceed as previously described:
− Press SET each time to save the settings.
− Press the + or – button to set the desired value.
5. Carry out the following settings:
− Your time zone (for most countries in Europe, 00 is
the correct time zone setting)
− Hours
− Minutes
6. Finally, press SET to conclude the procedure.

Starting signal reception manually

If the radio signal symbol to the left is no longer
displayed, the radio signals from the time signal
transmitter are no longer being received. The time
indicator nevertheless continues precisely.
48
Weather Station with Wireless Outdoor Sensor WS 2136-x