CONNECT THE WIRING
HOUSE
POWER
CABLE
HE0059
9
Connect House Power Cable to range hood wiring -
BLACK to BLACK, WHITE to WHITE, and GREEN or
BARE WIRE to GREEN Ground Screw.
COMPLETE INSTALLATION
10
Re-install the wiring cover, bottom cover, and filters that
were removed in Step 3.
LAMP REPLACEMENT
Pull the Tab on the Light Lens forward to remove the
1
lens.
GREEN
GROUND
SCREW
LIGHT
LENS
TAB
LAMP
LAMP
BASE
CAUTION: Bulb may be hot! Refer to packaging for
further information.
Grasp Lamp at Lamp Base, tilt lamp down and pull out to
2
remove.
NIGHT
LIGHT
Replace lamps. Use a 42 W Fluorescent Lamp,
3
GX24Q-4 and tilt lamp up into position. For Night Light,
use a 4 W, C-7 bulb.
SLOT
4
Place front edge of light lens into Slot. Push lens up and
snap it into place.
APE1 SERIES
Page 4
FLUORESCENT
LAMP