Confirmation Beep; Radio Mode; Switching To Radio Mode; Setting The Tuner - Blaupunkt Daytona MP26 Instrucciones De Manejo E Instalación

ADJUSTING THE VOLUME

Confirmation beep

For some functions you will hear a con-
firmation beep if you keep a button
pressed for longer than two seconds.
For instance, after storing a radio sta-
tion to a station button you will hear a
confirmation beep. The beep can be
switched on/off.
➮ Press the MENU button 4.
➮ Press the
or
edly until "BEEP" appears in the
display.
➮ Use the
or
switch between the options.
"OFF" means beep off, "ON" means the
beep is switched on.
➮ Press the MENU button 4.
button 9 repeat-
buttons 9 to

Radio mode

Switching to radio mode

If you are listening to CD/MP3, CD
changer or AUX mode,
➮ press the BND•TS < button
or
➮ press the SRC
edly until "FM" or "AM" appears in
the display.

Setting the tuner

In order to guarantee the perfect func-
tioning of the radio element, the unit
must be set for the region in which you
are located. You can choose between
Europe (EUROPE), America (USA),
Thailand (THAI) and South America
(S-AMERICA). The tuner comes from
the factory set for the region in which
the unit was sold. Should you encoun-
ter problems with radio reception,
please check this setting.
This set of instructions refers to the
"USA" setting.
➮ Switch off the device by pressing
button 1.
➮
Press and hold down the 1 and 5
buttons ; at the same time and
switch on the device again with
button 1.
"TUNER" is displayed.
➮
Press the
the next 8 seconds and select your
tuner region.
RADIO MODE
button 5 repeat-
buttons 9 within
9