Kohler K-3492 Guia De Instalacion página 6

5. Position the Tank
CAUTION: Risk of product damage. Do not push down on any part of the tank assembly other than
the cylinder. Damage may occur.
CAUTION: Risk of product damage. Do not rock or lift the tank after placement. The seal created by
the wax ring may be broken, resulting in leaking.
Remove the outlet gasket.
Mark the centerline on the floor.
Align the tank over the floor flange.
Lower the tank onto the floor flange. The T-bolts should align with the mounting slots in the base of
the tank.
Carefully align the tank on the centerline.
Position the tank on the T-bolts.
Press down on the cylinder where the gasket was mounted. Do not press anywhere else on the tank
assembly.
Replace the outlet gasket.
Position the loose end of the refill tube in the outlet ring.
1035530-2-C
Remove outlet
gasket.
Outlet Ring
Tank
Replace
outlet
gasket.
Centerlines
6
Refill Tube
Press here on cylinder.
T-Bolts
Floor Flange
Kohler Co.