Check Operation - Kohler K-3492 Guia De Instalacion

Push to
flush.

12. Check Operation

NOTE: The flushing mechanism works best if it is quickly tapped, not held down for an extended period
of time.
NOTE: There is an approximate eight-second delay between the flush and the tank refilling.
Flush the toilet and check for proper operation.
Refer to the troubleshooting table if the toilet does not function properly.
13. Secure the Vitreous Shell
CAUTION: Risk of product damage. Do not overtighten the screws when tightening. The vitreous
shell may chip or break if the screws are overtightened.
Insert a screw through both grommets.
Insert a screw in both of the provided holes and tighten. Do not overtighten.
Place a cap over each screw. The caps should be flush with the exterior of the shell.
1035530-2-C
Screw
Grommet
Cap
12 Kohler Co.