Putting The Robot In Standby; Stopping The Robot - Amibot Swip AS50 EVERYBOT Manual Del Usuario

EN
Operating the robot

Putting the robot in standby

When the robot is not active for 5 minutes, it automatically goes into
standby. The Start/Stop button then goes off. Press the Start/Stop
button on the robot or the remote control to make the robot come
out of standby mode. The robot restarts its cleaning cycle.

Stopping the robot

When the robot stops its cleaning cycle or when its back-up battery is
weak, it automatically stops and beeps several times to let you know.
Thanks to its light detector, the robot stops in an easy-to-access area
so that it can be retrieved.
To manually stop the robot, press the Start/Stop button on the robot
or on the remote control.
Switching off the robot
Turn the switch on the underside of the robot to "O". The robot is
switched off.
13