Washing Sequence - mabe LMD3123PBEB0 El Manual Del Propietario

16

washing sequence

1. Fill selection. Set the water inlet selector
to WASH. Adjust water level rod to a
position as needed.
2. Let water into the tub and add dissolved
powder detergent until water reaches a
suitable level. It begins to wash and
dispense detergent evenly.
3. Add the wash load, and supply water if
necessary.
4. Select the proper WASH PROGRAM
according to the load.
5. Select the WASH TIME according to the
load.
6. After washing, set the WASH PROGRAM
SELECTOR to DRAIN.
soft
wash program
wash time
soft
soft
wash program