Important - mabe LMD3123PBEB0 El Manual Del Propietario

18
rinsing
1. Load items to rinse into the washing tub. Select suitable WASH
TYPE according to the items to wash.
2. Set a proper water level using the adjusting lever according to the
size of the load. Let the water into the tub continuously.
3. Use the TIME knob to set a time between 5 and 7 minutes to per-
form the rinsing.
water saving rinse
Rinsing and spinning may be repeated 2 to 3 times using stored wa-
ter.
1. Load the items into the washing tub. Select a suitable WASH TYPE
according to the type of the load.
2. Let the tub to be filled with water to the selected water level.
3. To rinse, adjust the wash timer to 2-3 minutes of operation.
When rinsing a small load, you can select the LIGHT wash type. If
you select the NORMAL wash type water may splash outside the tub.
spinning
1. Arrange the items into the spinning tub evenly and smoothly.
2. Press the spinning plate inside the tub properly. Close the inner
and outer covers of the spinning tub.
3. Select a suitable spin time according to the type of the load.
During spinning, you may hear abnormal noises; generally they are
caused by an uneven load arrangement inside the tub. Stop the ma-
chine and rearrange the load.
If you open the outer spinning tub cover the machine will pause.
Close the outer cover to resume the spinning.

important

To spin and drain or to rinse with water-filling to-
gether, first spin for about 1 minute, then drain or
rinse with water-filling. Otherwise the spinning
will stop due to too much water stored in the spin
tub.