Steinberg RETROLOGUE2 Manual Del Usuario página 14

Retrologue
Synth Page
Detune
Octave
Coarse
Fine
Sub Oscillator
On/Off
Wave
Fix
Noise Generator
On/Off
Ring Modulator
On/Off
If the oscillator type is set to Multi, this parameter specifies by how many
cents the additional oscillators are detuned.
For example, if you use 5 oscillators and set Detune to 4, you get one
oscillator at the original pitch, and 4 detuned oscillators at -8, -4, +4, and +8.
Adjusts the pitch in octave steps.
Adjusts the pitch in semitone steps.
Fine-tunes the pitch in cent steps.
Activates/Deactivates the sub oscillator.
Allows you to choose between 3 waveforms for the sub oscillator: triangle,
saw, or square. The pitch of the sub oscillator is always one octave below the
overall pitch. If you modulate the overall pitch, the sub oscillator follows.
If this option is activated, the sub oscillator starts with a phase of 0 each time
that a note is played.
If this option is deactivated, the oscillator runs freely.
Activates/Deactivates the noise generator.
The Noise parameter is used for non-pitched sounds. In addition to standard
white and pink noise, there are also band-pass filtered versions (BPF) of white
and pink noise.
Activates/Deactivates the ring modulator.
14