Orbea RS Range Extender Manual De Usuario página 9

252 wh
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

16 | O RB EA
- With Shimano SC-EM800 display
In assemblies with theSC-EM800 display, the charge level
of the battery(s) will be shown on the screen.
100% - 81%
80% - 61%
60% - 41%
40% - 21%
20% - 1%
0%
- Compatible Garmin devices. Orbea RS Toolbox
The Orbea RS Toolbox application allows the display of
relevant Rise data on your compatible Garmin device,
including the charge level of the battery(s) as a percentage.
NOTICE
If, while riding the bicycle, the percentage
of the remaining battery is not visible in the
Orbea RS Toolbox, the data will be visible
again when the remaining battery level
drops by 1%. At that time, the EP8 system
will communicate the ANT+ battery level to
the Garmin unit and the battery level will be
visible on the unit.
USER' S MAN UAL
12.2. DISPLAYING THE RANGE
EXTENDER CHARGE LEVEL SEPARATELY
Press the main button on the Range Extender battery for 1
second to determine the charge level of the battery.
The LEDs will illuminate and show the current charge level
in 25% increments.
Avoid charge levels below 10% continuously.
1 sec.
CHARGE LEVEL
LEDs
75% ~ 100%
50% ~ 74%
25% ~ 49%
5% ~ 24%
0% ~ 4%
LED on
LED blinks at 2 Hz
LED blinks at 1 Hz
LED off
R S RANGE EXTENDER
1 3 C H A R GI NG TH E
R A N GE EXTE NDE R
To charge the Range Extender external battery, plug the
charger into an outlet. Without the charger connected to
the battery, the charger's LED will blink green.
NOTICE
If the charger's LED flashed red when con-
necting the charger to the bike or the Range
Extender, there is a problem with charging.
Disconnect the charger immediately and
contact an authorized dealer.
ORBEA | 17
Disconnect the Range Extender connection cable from
the bike's charging port by pressing the Range Extender's
charging port tab and connect the charger to the Range
Extender. The charger's LED will turn solid red while the
battery is charging.
When the battery is fully charged, the charger's LED will
blink green again to let you know that charging is com-
plete.
100%
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido