Cequent Performance Products 76184 Instrucciones De Instalación página 4

Open the tailgate. Pry open 4 plastic covers below taillights remove the 4
screws using a 7mm socket, 2 each side.
Remove 8 screws that connect the wheel well liner to the fascia using
T15 socket, 4 each side. Gently pull back the wheel well trim, remove 2
screws that connect the fascia to the vehicle body with a 7mm socket, 1
each side.
©2017 Horizon Global™ Corp - Printed in Mexico
Remove 2 screws that connect the bottom lower edge of the fascia to the
metal support tabs using a T20 socket.
Starting from the wheel well gently pull off fascia. Unplug any wires that
are attached.
Sheet 4 of 18 76184NP 8-4-17 Rev. A