Cequent Performance Products 76184 Instrucciones De Instalación página 5

Remove 4 M10 nuts with a 15mm socket from the top bumper
attachments, set nuts aside for re-attachment, 2 each side.
Return the bumper and bolts to the vehicle owner.
©2017 Horizon Global™ Corp - Printed in Mexico
Remove 4 M10 bolts with a 15mm socket from the bottom bumper
attachments, 2 each side. Be sure to support the vehicle exhaust system
as these bolts also attach the exhaust hangers.
Raise the hitch into position over the bumper studs, install the nuts
removed earlier. Raise exhaust hangers into position, install the M10 bolts
n and conical washers o (teeth side toward hitch).
Sheet 5 of 18 76184NP 8-4-17 Rev. A