About Moto-Tool; Start Up; Installing Accessories - Truper MOTO-A2 Instructivo

About the Rotary-tool
Before using the Rotary-tool please learn about all its application possibilities.
Rotary-tool is a high-speed, efficient, versatile and easy to handle manual tool.
It is designed to polish, cut, grind, strip, sand, bore, make holes, brush, clean, etc.
It has a small but powerful motor, equipped with a speed selector allowing to operate from 10 000 RPM up to 36000 RPM.
With a comfortable in the hand design accepts a large variety of accessories including high speed abrasive cutting discs,
silicon carbide grinding stones, tungsten carbide cutters, high-speed wire discs, polishing tips, embossing and cutting tips,
sanding discs, drill bits and other accessories.
These accessories have different sizes and shapes allowing a large scope of jobs.
As you adapt to the jobs and the large variety of accessories you will enjoy the Rotary-tool versatility.

Start Up

Installing accessories

• Un-plug the Rotary-tool.
1. Insert a collet (A) of the desired gauge for the axis
accessory into the Rotary-tool axis (B).
2. Depress the shaft lock (C) while threading but not
tightening the collet nut (D).
3. Insert he accessory (E) you need into the collet. Never
try to force entry of the accessory. Better, change the collet
and use a larger caliber.
4. Pressing the shaft lock use a collet wrench to tighten the
collet nut and have the collet securing the accessory. Verify
the accessory is not loose in the tightened collet. In which
case, change it for a lower caliber.
• To remove the accessory, press the shaft lock while
loosening the collet nut.
WARNING
• Do not press the shaft lock while the
tool is running.
1
A
B
2
D
3
E
4
C
7
ENGLISH