Truper MOTO-A2 Instructivo página 21

Start Up
Flexible extension
• Un-plug the Rotary-tool.
1. Remove the shaft cover (A).
2. Insert a collet (B) of the desired gauge for the flexible
extension end into the Rotary-tool axis (C).
1
3. Depress the shaft lock (D) while threading but not
A
tightening the collet nut (E).
4. Insert the flexible extension end into the collet, hold the
collet nut and threading the shaft cover secure the flex
extension into the Rotary-tool.
5. Fit the accessory in the tip of the extension as you do
with the other accessories in the Rotary-tool. (See page 7
"Installing accessories"). To block the shaft while installing
2
accessories in the flexible extension tip, slide the blocking
holder backwards. To release the shaft let the blocking
D
holder go to set it into its original position.
C
B
3
E
4
5
9
ENGLISH