Visualization Of Temperature Probes; Remote On/Off; Cycling Function - Parker PSE Serie Manual De Uso

English
set
Press to confi rm.
esc
Press to exit.
5.5 Viewing probe values
The dryer displays the dewpoint temperature by default.
To view other temperatures:
set
Press to enter the menu of direct parameters.
to fi nd parameter " Ai"
Use the arrows or
set
Press to enter.
Use the arrows or chosse the sensor.
b0 = dew point temperature sensor;
b2 = evaporation temperature sensor;
b8 = condensation temperature sensor;
Pi = High pressure sensor
Once chosen wait a few seconds and the value will probe value will ap-
pear.
esc
Press to exit.
set
HiSt
b8
....
set
0.0

5.6 Remote ON/OFF

set
Press and
menu "PAr" .
set
to enter on menu " CF9"
Press
Use the arrows
set
Press to enter.
Use the arrows
ON : remote ON;
OFF: remote OFF.
set
Press to confi rm.
esc
Press to exit.
Al
set
esc
b2
set
4.0
PSE 325-1000 60Hz
esc
together at the same time to enter on general
to fi nd the parameter " A7 ".
or
or to choose:
esc
set
PAr
set
esc
CF9
set
esc
C_F A7
set
esc
0n
OFF

5.7 CYCLING function

esc
set
Press and together at the same time to enter on general
menu "PAr" .
set
Press to enter on menu .
to fi nd the parameter " C4C".
Use the arrows or
set
Press to enter on menu .
to fi nd the parameter " C7 "
Use the arrows or
set
Press to choose:
ON : non-cycling (continuous);
OFF: cycling (energy saving).
set
Press to confi rm.
esc
Press to exit.
esc
set
PAr
set
esc
CF9
C4C
esc
C7
esc
On
OFF
4/12
set
set