Festo CPX-2A Serie Manual Del Usuario página 18

3.2 Fitting
When dismantling the sub-base or replacing the electronic
module:
– It is not necessary to remove the plugs and cables con-
nected to the sub-base.
Removing the I/O module:
1. Remove the screws and carefully lift up the sub-base.
2. If necessary: Pull the electronic module carefully away
from the current rails.
1 Screws,
tightening torque
0.9...1.1 Nm
2 Sub-base
3 Electrical plug
connector
4 Electronic module
5 Contact rails
Manifold base
6
18
1
2
3
4
5
6
Festo CPX-AX 0206NH English