Festo CPX-2A Serie Manual Del Usuario página 24

Output module CPX-2AA-U-I
(cont.)
Analogue outputs (cont.)
– Cable length
– Resolution (D-A converter,
internal)
– Isolation voltage
– Analoge value formation
– Cycle time
– Settling time
– for ohmic load
– for capacitive load
– for inductive load
– Permitted potential differences
– Between output channels
– Between OGND and FE
– Data on sensor selection
– Load resistance
– for ohmic load
– for capacitive load
– for inductive load
– short-circuit protection
– short circuit in current
– idling voltage
– Destruction limit against
externally applied voltages
– Connecting the actuators
24
Voltage Current
outputs outputs
Max. 30 m, screened
12 bits
500 V DC
≤ 2.5 ms
0.1 ms (≥ 1 kΩ) 0.1 ms (≤ 600 Ω)
0.7 ms (≤ 1 µF) –
– 0.5 ms (≤ 1 mH)
0 V AC
30 V DC
Min. 1 kΩ Max. 600 Ω
Max. 1 µF –
– Max. 1 mH
Yes –
Approx. 20 mA –
– 18 V
Max. 30 V Max. 30 V
lasting lasting
2 conductor 2 conductor
connections connections
Festo CPX-AX 0206NH English