Installation Area; Important; Ambient Working Conditions - Mondolfo Ferro Startline S 524 Manual De Uso

5.1 INSTALLATION AREA

Install the machine in compliance with all the applicable safety standards, includ-
ing, but not limited to, those issued by OSHA.
IMPORTANT: for the correct and safe operation of the equipment, the ambient lighting
level should be at least 300 lux.
IMPORTANT: Do not install the machine outdoors. It is designed to be used in closed,
covered areas.
RISK OF EXPLOSION OR FIRE. Do not use the machine in areas that could be ex-
posed to inflammable vapours (petrol, paint solvents, etc.).
Do not install the machine in a narrow area or position it below floor level.
Install the tyre changer in the chosen work
position, complying with the minimum
clearances shown in fig.8.
The support surface must have a load-bear-
ing capacity of at least 1000 kg/m

Ambient working conditions

- Relative humidity 30% ÷ 95% without con-
densation.
- Temperature 0°C ÷ 50°C.
Whenever the machine is disconnected from the pneumatic line for long periods,
before restoring the pneumatic supply, check the configuration of the pedals as
shown below.
108
WARNING
CAUTION
CAUTION
DANGER
2 .
500
WARNING
Startline S 424-S 421-S 521-S 524 Operator manual
750
8