Carl Stahl Kromer 7228 Serie Instrucciones De Empleo página 37

Warranty
We give a manufacturer's warranty for operation and fault-
free materials with the zero spring balancer of 24 months
from the date of delivery. This does not apply to the conse-
quences of normal wear, overloading, improper operation or
the use of non-original replacement parts.
A warranty claim can only be accepted if the device is sub-
mitted to us for inspection without being dismantled.
Damage due to faulty material or manufacture will be reme-
died by cost-free replacement or repair.
Our general terms of business apply.
CE-Declaration of Conformity/
CE Manufacturer's Declaration
We declare with sole responsibility that this product is
developed, constructed and manufactured in compliance
with EC directive 98/37/EEC dated 22.06.1998. The follo-
wing standard apply: EN 292 and DIN 15112. If this product
is to be installed in a machine, the initial operation of the
product is prohibited until it is established that the machine
complies with the provisions of the EC machinery directive
and the standards to be applied.
Bernd Lienhard
Head of Quality assurance
Carl Stahl Kromer GmbH
Walter-Knoell-Straße 3
D-79115 Freiburg
Only the original German language version is legally
binding. Subject to change.
Thomas Steinle
Product Manager
37