First Ride; Charging; Learning To Ride - Segway ninebot KickScooter ES Serie Manual De Usuario

6 First Ride

There are safety risks when learning to ride the KickScooter. You must read the Safety
Instructions via the App before your first ride.
For your safety, your new KickScooter is not activated and will beep occasionally after Power
ON.
Until activated, the KickScooter maintains a very low riding speed, and can not be ridden
with full function. Install the App on your mobile device (with Bluetooth 4.0 or above),
connect to the KickScooter with Bluetooth, and follow the App instructions to activate your
KickScooter and enjoy the full performance.
Scan the QR code to download the App (iOS 8.0 or above, Android™ 4.3 or above).
Install the App and register/login.
1
Click "Vehicle"→"Search device" to connect to your
3
KickScooter.
The KickScooter will beep when the connection is
successful. The Bluetooth icon will stop blinking and
remain illuminated.
4 Follow the App instructions to active the KickScooter and learn how to ride safely.
You can now start to use your KickScooter, check the status with App, and interact with other users. Have fun!
08
Power on the KickScooter. A blinking Bluetooth
2
icon indicates the KickScooter is waiting for a
connection.
Vehicle N Fans Club Discover Me

7 Charging

ES4
Charge port
ES1/ES2
Charge port
WARNING
Do not connect the charger if the charge port or charge cable is wet.
Your KickScooter is fully charged when the LED on the charger changes from red (charging) to green (trickle charge).
Close the charge port cover when not charging.

8 Learning to Ride

Wear an approved helmet and other protective gear
to minimize any possible injury.
Charging step tips
Open the charge Insert the Close the charge
port cover. charge plug.
port cover when
finished.
1. Power on the scooter and check the
indicator lamp power level. Charge the
scooter if the battery level is low.
09