Lenco TFT-726 Manual Del Usuario página 11

2. Manual Search
Install new channels manually. This option adds new channels without
changing the current channels list.
1. Select [Manual Search] then press OK or RIGHT. The channel search
screen will appear
Manual Search
Frequency channel
Frequency(MHz)
Bandwidth:
Quality
EXIT EXIT
2. Press the RIGHT/LEFT key to select the channel frequency
3. Press OK to start searching channels
If a channel is found, it is saved and added to the channels list.
If channels cant be found, then exit the menu.
(3) Country
Select your country of residence.
(4) Antenna power
Enable Antenna Power if an external active antenna is connected.
(8) Time Setting
To access the Menu,press MENU then select [Time]. The Menu provides
options to adjust the time settings.
Press UP/DOWN to s elect an option and press RIGHT/LEFT to adjust
thesettings.Press EXIT to exit the menu.
Time Offset
Country Region
Time Zore
Sleep
EXIT Return
21
474.0
8M
OK Confirm
Time
Auto
London
GMT +0
Off
OK Confirm
(1) Time offset
Select auto or manual for GMT offset adjustments.
(2) Country Region
Select the Country Region when [Time Offset] is set to Auto.
(3) Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
(4) Sleep:
The function is use to select standby setting: OFF, 3 HOURS,
4 HOURS
OFF: No standby
3 HOURS: No remote control and panelkey operation within three
hours into standby
4 HOURS: No remote control and panelkey operation within four
hours into standby
(9) Option
To access the Menu,press MENU and select [Option]. The menu provides
options to adjust the OSD Language, Subtitle Language and Audio
Language.
Select an option and press RIGHT/LEFT to adjust the setting.
Press EXIT to exit The Menu.
OSD Language
Subtitle Language
Audio Language
Digital Audio
EXIT
10
Option
English
English
English
PCM
Return OK Confirm