Lenco TFT-726 Manual Del Usuario página 12

(1). OSD Language
Select an OSD language
(2). Audio Language
Select the preferred audio language for watching TV channels.
If the language is not available, the default program language will
be used.
(3). Subtitle Language
Select the preferred subtitle language.
(10) System Setting
To access the Menu,press MENU and select [System].The menu
Provides options to adjust the system settings.
Press the UP/DOWN key to select an option and press
RIGHT/LEFT to adjust the setting.
Press EXIT to exit the Menu .
System
Parental Guidance
Set Password
Restore Factory Default
Information
EXIT
Return OK Confirm
(1) Parental Guidance
You can restrict access to channels that are unsuitable for children.
To restrict/lock the channel you will need to enter either the
default password '000000' or your own password.
(2) Set Password
Set or change the password for Locked programs. Enter your old
Password or the default password '000000'. You will then be asked
to enter your new password. To confirm re-enter your new password.
Once it is confirmed, press EXIT to exit the Menu.
(3) Restore Factory Default
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select [Restore Factory Default] and press OK or RIGHT to
select. Enter your password or the default password '000000' and press OK
to confirm. This option will delete all preset channels and settings.
(4) Information
View model, hardware and software information.
(5) Software update
If the status is set ''ON'', it will begin searching for new software from
broadcast according to your preferred time in ''Start Time''.
(11)USB
To access the Menu, press the Menu button and select USB.
Multi-Media
Switch to USB mode and plug in USB to view files.
11
USB
Multimedia
Photo Configure
Movie configure
PvR configure
EXIT Return Confirm
OK