Lenco KCR-200 Manual De Usuario página 10

Storing DAB+ Presets
You can save up to 20 DAB+ stations.
1. Tune to the station you wish to store.
2. Press and hold the MEMORY button on the unit (the MEMORY button on the remote control). Preset channel number is displayed.
3. Press the or
want to store. Then press the MEMORY button to save.
Storing DAB+ Presets (Through Menu Operation)
You can save up to 20 FM presets.
1. Tune to the station you wish to store.
2. Press and hold the INFO / MENU button on the unit (or press the MENU button on the remote control) to access the menu
operation.
3. Press the or
press ENTER button.
4. Press the or
want to store. Then press the ENTER button to save.
Recall Stored DAB+ Presets
Press the CH- or CH+ button directly tune to the preset channel.
To directly recall the preset channel by using the numeric buttons on the unit, press the numeric buttons [1], [2], ..., [5].
For example when the button [3] is pressed, the display shows "P03" and wait for a while it will tune to the preset 3.
Or when press and hold the button [3 / (8)] button until the display shows "P08" and wait for a while, it will tune to the preset 8.
Or when press the button [1] button and followed by pressing the button [2], the display will show "P12" and after a while it will tune
to the preset 12.
Or when press the button [1] button and followed by press and hold the button [3 / (8)], the display will show "P18" and after a while
it will tune to the preset 18.
Alternatively you can use the remote control numeric buttons to directly recall the preset channel, press the numeric buttons [1], [2], ...,
[9], [0].
For example when the button [3] is pressed, the display shows "P03" and wait for a while it will tune to the preset 3.
Or when press the button [8] until the display shows "P08" and wait for a while, it will tune to the preset 8.
Or when press the button [1] and followed by pressing the button [2], the display will show "P12" and after a while it will tune to the
preset 12.
Or when press the button [1] and followed by press the button [8], the display will show "P18" and after a while it will tune to the
preset 18.
Recall Stored DAB+ Presets (Through Menu Operation)
1. Press and hold the INFO / MENU button on the unit (or press the MENU button on the remote control) to access the menu
operation.
2. Press the or button on the unit (the
press ENTER button.
3. Press the or
want to recall. Then press the ENTER button to tune to the preset station number.
Note:
The antenna wire at the rear panel of the unit should be fully extended to ensure a good reception. Alter the antenna position for
-
the best reception.
button on the unit (the TUNE
button on the unit (the
button on the unit (the TUNE
button on the unit (the TUNE
/ TUNE button on the remote control) to a preset number that you
or button on the remote control) until "Preset Store" is displayed and then
/ TUNE button on the remote control) to a preset number that you
or button on the remote control) until "Preset Recall" is displayed and then
/ TUNE button on the remote control) to a preset number that you
10