Fm Radio Operation - Lenco KCR-200 Manual De Usuario

FM RADIO OPERATION

Auto Scan
1. Turn on the unit in FM mode.
2. Press and hold the SCAN button on the unit (or press the SCAN button on the remote control) to start auto-scanning and saving
the available channels (max. 20 storage).
Manual Scan
1. Press the or button on the unit (the TUNE
a different frequency.
2. Press and hold the
to the next available channel.
Storing FM Presets
You can save up to 20 FM presets.
1. Tune to the station you wish to store.
2. Press and hold the MEMORY button on the unit (the MEMORY button on the remote control). Preset Store number is displayed.
3. Press the or
want to store. Then press the MEMORY button to save.
Storing FM Presets (Through Menu Operation)
You can save up to 20 FM presets.
1. Tune to the station you wish to store.
2. Press and hold the INFO / MENU button on the unit (or press the MENU button on the remote control) to access the menu
operation.
3. Press the or
press ENTER button.
4. Press the or button on the unit (the TUNE
want to store. Then press the ENTER button to save.
Recall Stored FM Presets
Press the CH- / CH+ button on the remote control to tune to different preset channel.
To directly recall the preset channel by using the numeric buttons on the unit, press the numeric buttons [1], [2], ..., [5].
For example when the button [3] is pressed, the display shows "P03" and wait for a while it will tune to the preset 3.
Or when press and hold the button [3 / (8)] button until the display shows "P08" and wait for a while, it will tune to the preset 8.
Or when press the button [1] button and followed by pressing the button [2], the display will show "P12" and after a while it will tune
to the preset 12.
Or when press the button [1] button and followed by press and hold the button [3 / (8)], the display will show "P18" and after a while
it will tune to the preset 18.
Alternatively you can use the remote control numeric buttons to directly recall the preset channel, press the numeric buttons [1], [2], ...,
[9], [0].
For example when the button [3] is pressed, the display shows "P03" and wait for a while it will tune to the preset 3.
Or when press the button [8] until the display shows "P08" and wait for a while, it will tune to the preset 8.
Or when press the button [1] and followed by pressing the button [2], the display will show "P12" and after a while it will tune to the
preset 12.
Or when press the button [1] and followed by press the button [8], the display will show "P18" and after a while it will tune to the
preset 18.
or button on the unit (the TUNE
button on the unit (the TUNE
button on the unit (the
/ TUNE button on the remote control) repeatedly to manually tune to
/ TUNE
/ TUNE button on the remote control) to a preset number that you
or button on the remote control) until "Preset Store" is displayed and then
/ TUNE button on the remote control) to a preset number that you
12
Preset channel number
"S" for Stereo
"M: for Mono
button on the remote control) to automatically search