Bluetooth Audio; Sleep Function; Timer Setup - Lenco KCR-200 Manual De Usuario

BLUETOOTH AUDIO

Please follow the pairing instructions below to link the unit to your Bluetooth device.
1. Press the SOURCE button to enter the Bluetooth mode. The display will flash. It will start searching and the display keeps flashing.
2. If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the display will keep flashing.
Turn on the Bluetooth function of your device and enable the search until "Lenco KCR-200" is found. Select "Lenco KCR-200" on
the Bluetooth device to make connection. Enter the pass code "0000" if required.
3. After successfully paired the display will become steady without flashing.
4. You can now start playing music from your smartphone wirelessly to the speaker.
5. You can press the PLAY / PAUSE
6. You can press the

Press and hold the PAIRING button will disconnect the current connection and start to search another new Bluetooth device.

SLEEP FUNCTION

1. When the unit is switched on, press the SLEEP button on the remote control repeatedly to select the sleep duration in minutes
among sleep off, 05, 10, 15, 30, 45 and 90
2. During the sleep timer count down, there is a character "S" shown on the display right hand side.
3. When the sleep timer is zero, the unit will be turned off automatically.
4. To cancel the sleep function, press and hold the STANDBY button on the unit (or press the STANDBY button on the remote control)
to turn off. Alternatively press the SLEEP button repeatedly to "sleep off".
CLOCK & DATE SETUP
1. Turn off the unit in Standby mode.
2. Press the CLOCK SET button to enter the setup.
3. Minute digit display will flash. Press the
4. Second digit display will flash. Press the
5. Day digit display will flash. Press the
6. Month digit display will flash. Press the
7. Year digit display will flash. Press the
setup.
Note:
The time, date and year set may automatically be overridden by the DAB+ or FM station real time information.
-

TIMER SETUP

1. Press the TIMER button to enter the Timer setup.
2. Press the MIN. and SEC button to adjust the minute and second respectively. Press the TIMER button.
3. Press the or button to enable (on) or disable (OFF) the timer setup. When it is set to on, press the TIMER button to finish the
timer setup. It will start to count down.
4. During the timer count down, there is a flashing character "T" shown on the display right hand side.
5. During the timer count down, press the TIMER button will stop the count down. The remaining count down time will be displayed.
After a while, the display will resume to normal operation display. "T" is still shown on the display but without flashing meaning it
is pause. Further pressing the TIMER button will resume the count down. "T" will continue flashing.
6. To cancel the count down, press the TIMER button once to pause the count down. Then during the remaining count down time is
displayed, press and hold the TIMER button will cancel the count down.
7. When the timer count down is finished, the alarm buzzer will be turned on. Press TIMER button will stop the buzzer.
button to pause or resume the playback.
or button to skip to the previous or next song.
or
or
or button to set the day. Press the CLOCK SET button to confirm.
or
or button to set the year. Press the CLOCK SET button to finish the clock & date
button to set the minute. Press the CLOCK SET button to confirm.
button to set the second. Press the CLOCK SET button to confirm.
button to set the month. Press the CLOCK SET button to confirm.
14
SLEEP Indicator
TIMER Indicator