Zoeller 1463-0006 Instrucciones página 41

Unit must be securely and adequately electrically grounded. This can be accomplished by wiring the unit to
a ground metal-clad raceway system or by using a separate ground wire connected to the bare metal of the
motor frame or other suitable means.
• ELECTRICAL SHOCK ALERT.
Make certain the electrical power source is adequate for the requirements of the pump.
• ELECTRICAL SHOCK ALERT.
Never use an extension cord with this pump.
• CHEMICAL ALERT.
Prop65 Warning for California residents:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
• HAZARDOUS PRESSURE ALERT.
Install pressure relief valve in discharge pipe. Release all pressure on system before working on any
component.
• EXPLOSION ALERT
Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use in
flammable and/or explosive atmospheres.
CAUTION
• PRODUCT DAMAGE MAY RESULT
This pump is not to be used for irrigation or water systems.
• PRODUCT DAMAGE MAY RESULT
Protect the power cable from coming in contact with sharp objects.
• PRODUCT DAMAGE MAY RESULT
Do not run pump dry.
• PRODUCT DAMAGE MAY RESULT
Pump and plumbing must be full of water before startup.
• PRODUCT DAMAGE MAY RESULT
Do not pump water which contains sand, mud, silt, or debris.
• INJURY MAY RESULT
Be careful when touching the exterior of an operating motor. It may be hot enough to be painful or cause
injury.
PACKAGE CONTENTS
Description
A Pump
B Ejector
C Gasket
D Bolts
E 20/40 Pressure Switch
F Control Body
G Control Body Adjustment Screw
H Strain Relef
I 1" x 3/4" PVC Adapter
E
Quantity
CAUTION
1
1
1
2
1
1
1
1
1
F G
© 2020. All rights reserved.
H
I
3
A
C B
D
IL0194