5. Continue with fittings and pipe to the pressure
tank. A 3/4 in. union is optional but recommended
for easy connection and disconnection.
CAUTION: Install a pressure relief valve on any
installation where the pump pressure can exceed
the maximum working pressure of the tank and
plumbing.
TANK TO HOUSE CONNECTION
1. Most pressure tanks will have a 1 inch inlet elbow
on the bottom. Connect to this elbow with a 1 in.
MPT x 1 in. slip (glue) adapter and short piece of
pipe.
2. Install a 1 in. elbow.
3. Attach a 1 in. slip (glue) x 3/4 in. FPT adapter
and 3/4 in. MPT x 3/4 in. slip.
5
1
IL1365
2
IL1366
3
8
© 2020. All rights reserved.
Glue
IL1387
Adapter
Glue
Pipe
Glue
Coupling
Adapter
Glue
Elbow