Alcad PDK-01100 Manual Del Usario página 17

DIGIT AL VIDEO DOOR ENTRY SYSTEMS
STEP-BY-STEP CONFIGURATION
Simultaneously press the keys .
Enter the MASTER key.
If this is the first time that you have accessed the configuration menu, enter the code 12345 (Default MASTER code). If it is
not the first time, enter the MASTER key which you have previously configured. The panel will emit a beep. The display will
show the text ALCAd before going to position 1 of the menu.
If the code is incorrect, the panel will emit a beep indicating that an error has been made and the red LED will flash. Begin
again at step 1.
Adapt the values of the different positions to the type of installation. See "Configuration of the Entrance Panel according the
installation", page 23.
To change the setting, press the key. The information shown in the display will begin to blink (3.1). Select the desired
value with the keys. In positions 14, 15, 16, 17 and 19, key in the desired code. Press the key to confirm the
setting
Note: The maximum time allowed between step 1 and step 2 is 30 seconds. Once this period has elaspsed, you must begin again
at step 1.
- STEP-BY-STEP CONFIGURATION -
MASTER code How to adapt the value of the positions
Maximum time limit
Positions 14,15,16,17, 19
Incorrect code
Remaining positions