Description - Alcad PDK-01100 Manual Del Usario

DESCRIPTION

System whereby the entrance panel incorporates a numeric keypad (1) which enables the user to call the monitor/telephone in a flat by keying
in a code previously assigned to the device (Programming the device). It also incorporates a numeric display (2) which shows the visitor the
code which has been keyed in.
Acting in parallel with this panel, it is possible to install another panel, or several panels, with a directory (3) whose purpose is to inform the
visitor of the code he should compose on the keypad to call the desired flat.
Characteristics:
System which makes it possible to carry out medium and large scale installations. It is possible to install up to 4 devices (monitors/telephones)
per apartment.
The system makes it possible to manage:
Buildings with up to 999 monitors/telephones (150 monitors/telephones per riser. For a greater number of devices, carry out the installation
in several stages. See the appropriate diagram)
- Housing estates of up to 99 buildings with keypad entrance panel. Up to 999 monitors/telephones per building.
- Housing estates of up to 99 buildings with pushbutton entrance panel. Up to 96 monitors/telephones per building.
The connection system is as follows: a single two-wire communication BUS, between the entrance panel and the telephones as well as between
the different entrance panels (installations with several points of entry), 2 wires for the power supply of the monitors and the coaxial cable
for carrying the video signal.
The communication BUS to monitors/telephones is without polarity of connection.
If a short circuit occurs in the BUS, the text "F0" flashes in the entrance panel display until the short circuit disappears
The programming of each monitor/telephone is carried out from the main entrance panel of the installation. The entrance panel confirms that
the monitor/telephone has successfully received the code by emitting a confirmation tone
The looped auto-switch-on function
It is possible to activate the electric lock directly from the entrance panel by composing a previously-defined 5-digit code (Door-opening
function). Four different 5 digit codes are permitted. Possesses a security system which disables this option when a certain number of consecutive
attempts have been made to enter an incorrect code. Both the number of unsuccessful attempts permitted and the length of time during which
the function remains disabled are values which can be configured.
It is likewise possible to configure the call tone, the number of times the call tone is repeated, the time setting to answer the call, the maximum
time setting for conversation, the number of digits in the code of each monitor/telephone and the time during which the electric door lock is
activated.
Note: The configuration of the above-mentioned parameters is carried out from the entrance panel itself (Entrance Panel Configuration).
To configure the entrance panel, a configuration menu is available. This menu is accessed from the keypad of the entrance panel itself.
9800001 PDK-01100 ENTRANCE PANEL WITH DIGITAL AUDIO UNIT, B/W VIDEO UNIT COAXIAL, NUMERIC DISPLAY
AND KEYPAD
ndividual exterior entrance panel for digital door entry system installations. Houses the GRF-011 audio unit, the TCB-010
video unit and the KPD-001 numeric keypad.
9610011 GRF-011 DIGITAL AUDIO UNIT WITH NUMERIC DISPLAY
Digital audio unit for entrance panel with numeric keypad. With a built-in numeric display which allows the code composed
on the panel’s keypad to be seen. Has volume controls both for the entrance panel and for telephones. Generation of
electronic call with audio confirmation for the visitor.
The electronic circuit is protected against short circuits.
9640000 TCB-010 B/W VIDEO UNIT COAXIAL
Black and white video unit with a 1/3" CCD sensor for videodoor entr y system installations.
The video unit consists of one video output for coaxial cable, infrared lighting for nocturnal vision and multidirectional
controller of the angle of view - up to 10
Fed from the audio unit of the entrance panel. Plug-type terminals for easy connection. The electronic circuit is protected
against short-circuits.
9610018 KPD-001 NUMERIC KEYPAD
Element which enables the visitor to enter the code of the flat which he wishes to call or the code which activates the
electric lock directly. Audio confirmation when a key is pressed, with the possibility of regulating the volume of the beep.
Incorporates the electric lock relay as well as two double contact relays, relays 1 and 2, useful for applications in which it
is necessary to direct additional elements
pushbutton on the telephone in the flat (See the data sheet of the telephone). Likewise it is possible to activate relay 2 by pressing any key on
the keypad. In both cases, the time that the relay remains active can be set, since this is a configurable value.
DIGIT AL VIDEO DOOR ENTRY SYSTEMS
O
.
. It is possible to activate relay 1 by means of the auxiliary