Installing And Adjustment Instructions - Alcad PDK-01100 Manual Del Usario

INSTALLING AND ADJUSTMENT INSTRUCTIONS

Remove the reinforcement of the flush-
mounted box.
Place the rings of the panel over the
extracted fixing pins. The unused pins
should be placed in their slots.
Configure the entrance panel. See
configuration instructions.
Adjust the volume level on the entrance
panel and on the monitors/telephones
(1). It is also possible to regulate the
volume of the beep
Régler le volume du son de la plaque
de rue et des moniteurs/téléphones (1).
Régler le volume de la configuration de
la pression des touches du clavier (2).
DIGIT AL VIDEO DOOR ENTRY SYSTEMS
Remove the protecting plugs and the
fixing pins from the flush-mounted box.
Choose the two fixing pins you want
to hinge the panel on to, so that it
opens either to the right or to the left
or downwards.
Make the electrical connections. See
diagrams and connection instructions.
Programme the monitors/telephones
from the main entrance panel (Look up
in the technical datasheet that comes
with the connection bracket/telephone).