Basic Installation - Alcad PDK-01100 Manual Del Usario

DIGIT AL VIDEO DOOR ENTRY SYSTEMS

BASIC INSTALLATION

SINGLE-WIRED DIAGRAM
SECTION TABLE
Up to 100 m -
W
Up to 25 m -
Operation
Configure the panel as the main entrance panel (P). (See page 19)
The function activating the electric lock from the entrance panel remains enabled at all times.
SYSTEM ON STANDBY
The monitors are inactive (communication with the entrance panel and door opening functions are disabled). If the handset of a monitor is lifted,
an uninterrupted tone will be heard. It is possible to activate the monitor's automatic switch-on system always providing that the system is not
engaged.
SYSTEM ACTIVE. MAKING A CALL
Only the monitor whose code is identical to the code which has been entered will receive the call. Confirmation of the call on the entrance panel.
If the handset of another monitor is lifted, intermittent tones will be heard and the auto switch-on function will not operate. If the handset of the
requested monitor is off the hook or if the code does not correspond to any monitor, the panel will emit intermittent tones. When several monitors
are installed in the flat, all of them receive the call. The first monitor to be answered will establish communication with the the entrance panel.
Time setting to answer: Configurable (Position 7 from the configuration menu).
Maximum time setting for conversation: Configurable (Position 6 from the configuration menu).
During both these periods of time, the entrance panel display will show the code which has been entered.
tion des gâches de la plaque est fonctionnelle à tout moment.