Mondolfo Ferro AS 924 Manual De Uso página 100

- Press the pedal
Repeat this operation on the other side of the wheel.
It may be necessary to break the bead at several points to free it completely.
Releasing the pedal inverts the direction of movement of the bead breaking shoe.
After detaching the beads, remove the old balancing weights.
- Thoroughly lubricate the sides of the tyre around the entire circumference of the lower
and upper bead to facilitate demounting and avoid damaging the beads (fig.17).
EXTENDIBLE ARM
1
100
(fig.16) to operate the bead breaker and detach the bead.
A= STANDARD POSITION
(50-280 mm)
B= WIDE WHEEL POSITION
(130-260 mm)
A
10
B
15
AS 924 - AS 924 A Operator's Manual
A
B
16
17