Mondolfo Ferro AS 924 Manual De Uso página 113

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Risk of explosion. During the bead insertion phase, do not exceed the maximum pressure
indicated by the manufacturer.
Operate the inflation jets only for tyre bead insertion.
Discharge the air from the pneumatic system before disconnecting the power supply or
other pneumatic components. The air is accumulated in the tank for operating the bead
insertion jets.
Activate the air jets only after having made sure that the rim is secured correctly.
RISK OF EXPLOSION. Do not mount a tire and a rim that do not have the same diameter
(for example, 16.5 inch tyre and 16 inch rim).
If the tyre is over-inflated, air may be released by pressing the brass manual deflation
button located below the air pressure gauge (2 - Fig.40)
- Disconnect the inflation hose from the valve stem.
- Press the pedal
the "resting" position.
- Remove the wheel from the tyre changer.
AS 924 - AS 924 A Operator's Manual
CAUTION
CAUTION
CAUTION
CAUTION
to bring the column to
1
2
40
UK
113

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

As 924 a

Tabla de contenido